LCArchery
LCArchery
  • 104
  • 1 708 854
Square Up + Instructional
Join GRIV as he demonstrates how to set up and use the Square Up from Last Chance Archery.
The Square Up is an excellent new high-precision squaring device and arrow spinner tool. It uses an adjustable diamond squaring insert that is the perfect solution for squaring arrow shafts or inserts. You can use this tool hundreds to thousands of times without wearing out the diamond insert. With other squaring devices, the sanding disc or the cutter must be changed out after limited uses, not with the Square Up. The diamond insert is the only way to go and is the correct tool for the job. Combine the diamond insert with high-quality bearings and a precision-milled tool, and you have the perfect combo to help build the most accurate arrow possible, which results in much higher accuracy and success in the field.
Features:
• High-precision squaring device
• Adjustable diamond insert for squaring
• Arrow spinner
• High-quality, smooth bearings
• Square shafts or inserts
• Spin any shaft to check straightness
• Precision milled tool
Included:
1 - Square Up
2 - Lag Bolts
2 - Washers
BUY NOW: lastchancearchery.com/square-up
#lastchancearchery #tuning #archery #archerytools #bestarcherytools
Переглядів: 1 291

Відео

Introducing the Square Up
Переглядів 7264 години тому
Introducing the Square Up from Last Chance Archery. The Square Up is an excellent new high-precision squaring device and arrow spinner tool. It uses an adjustable diamond squaring insert that is the perfect solution for squaring arrow shafts or inserts. You can use this tool hundreds to thousands of times without wearing out the diamond insert. With other squaring devices, the sanding disc or t...
Thing A Week #27 - Rescue Techniques
Переглядів 1,7 тис.9 годин тому
In this Thing A Week, we will discuss how to keep your shot as smooth as possible, even when archery gets hard. This is my favorite breathing technique, and it’s been one of the Hornets' secret weapons for years. Enjoy. UA-cam: LCArchery & Georgeryals Buy Tuning Gear: www.lastchancearchery.com Get lessons from GRIV: improvemyarchery.com Thing A Week, brought to you by Last Chance Archery. #last...
Thing A Week #26 - Keeping a Level Bubble
Переглядів 3,9 тис.День тому
In this Thing A Week, GRIV will show you why your bubble gets out of level and how to fix it. You’ll also learn a good practice technique to become so good at keeping level form that you won’t have to remember to do it every time. As always, you can get lessons from GRIV at www.improvemyarchery.com UA-cam: LCArchery & Georgeryals Buy Tuning Gear: www.lastchancearchery.com Thing A Week, brought ...
Thing A Week #25 - Getting Your Peep Right and Why
Переглядів 4,3 тис.14 днів тому
In this week's episode of Thing A Week, GRIV goes through everything you need to know about your peep sight. Contents The real job of the peep Explanation of why most internet coaches have it wrong Centering the peep with the target How the peep affects stability Setting your peep for the Total Archery Challenge, indoors, or lawn archery UA-cam: LCArchery & Georgeryals Buy Tuning Gear: www.last...
Thing A Week #24 - Complete Bow Rebuild
Переглядів 3,5 тис.21 день тому
Join GRIV for another Thing A Week. In this week’s episode, George will show us how to properly execute a complete bow rebuild. Don’t miss out! Using the bow press Taking the strings off Decompressing bow Changing the cable guard system Changing the cams Getting spacers right Putting strings back on Setting timing Basic settings for peep and draw length Installing a torqueless d-loop An easier ...
Thing A Week #23 - Step #4 of the Big 4 (Follow Through)
Переглядів 4 тис.Місяць тому
Thank you so much for going through the Big 4. This simple set of steps has had an amazing impact on my archery over the years. It’s the magic trick the Hornet Team uses to be as successful as possible in tournaments and Hunting. Enjoy Step #4! Step 1 ua-cam.com/video/j-NLY8mhOqg/v-deo.htmlsi=TfCPmMMuaWb4WQSX Step 2 ua-cam.com/video/j-NLY8mhOqg/v-deo.htmlsi=TfCPmMMuaWb4WQSX Step 3 ua-cam.com/vi...
LCA - Independence Day Giveaway
Переглядів 559Місяць тому
Join LCA's Jonathan Clark for details about Last Chance Archery's Independence Day Giveaway... Learn more here: lastchancearchery.com/independencegiveawayentry
Thing A Week #22 - Step #3 of the Big 4
Переглядів 5 тис.Місяць тому
Thing A Week #22 - Step #3 of the Big 4
Thing A Week #21 - Step #2 of the Big 4 (Drawing & Releasing Tension: Creating Pressure )
Переглядів 7 тис.Місяць тому
Thing A Week #21 - Step #2 of the Big 4 (Drawing & Releasing Tension: Creating Pressure )
Pro Grain Scale 2.0 + Instructional
Переглядів 812Місяць тому
Pro Grain Scale 2.0 Instructional
Introducing the Pro Grain Scale 2.0
Переглядів 664Місяць тому
Introducing the Pro Grain Scale 2.0
Thing A Week #20 - Step #1 of the Big 4 (CONSISTENCY)
Переглядів 6 тис.Місяць тому
Thing A Week #20 - Step #1 of the Big 4 (CONSISTENCY)
Thing A Week is coming back!!!
Переглядів 901Місяць тому
Thing A Week is coming back!!!
LCA & Total Archery Challenge
Переглядів 8033 місяці тому
LCA & Total Archery Challenge
Mathews Finger Set + Instructional
Переглядів 6 тис.8 місяців тому
Mathews Finger Set Instructional
Introducing the Hang-It
Переглядів 1,2 тис.10 місяців тому
Introducing the Hang-It
3" Block Kit + Instructional
Переглядів 3,4 тис.11 місяців тому
3" Block Kit Instructional
3" Pin Kit + Instructional
Переглядів 3,6 тис.11 місяців тому
3" Pin Kit Instructional
MINI Xbow Adapter + Instructional
Переглядів 1,2 тис.11 місяців тому
MINI Xbow Adapter Instructional
Ultimate EZ Press + Instructional
Переглядів 4,4 тис.11 місяців тому
Ultimate EZ Press Instructional
Introducing the Ready Blade
Переглядів 4,1 тис.Рік тому
Introducing the Ready Blade
Introducing the Revolution Vise
Переглядів 9 тис.Рік тому
Introducing the Revolution Vise
Limb Lock Kit + Instructional
Переглядів 8 тис.Рік тому
Limb Lock Kit Instructional
Revolution Arrow Tuner + Instructional
Переглядів 10 тис.2 роки тому
Revolution Arrow Tuner Instructional
VMP Fletching Station + Instructional
Переглядів 4,8 тис.2 роки тому
VMP Fletching Station Instructional
Double Bright + Instructional
Переглядів 9662 роки тому
Double Bright Instructional
MagBright5X + Instructional
Переглядів 1,5 тис.2 роки тому
MagBright5X Instructional
EZ Green Press + Instructional
Переглядів 27 тис.2 роки тому
EZ Green Press Instructional
RAS - V Notch Assembly + Instructional
Переглядів 1,6 тис.2 роки тому
RAS - V Notch Assembly Instructional

КОМЕНТАРІ

  • @noeramirez4975
    @noeramirez4975 День тому

    Thank You!!! Very good information

  • @PennNative
    @PennNative 2 дні тому

    George, I have never heard of only having to square exposed end of insert! just yesterday i made up 2 dozen new shafts and did both ends of shaft. Had i know i would have waited till the inserts were in 😂 Next video.. nock indexing arrows to the spine.

  • @CountryOutdoorsYoutube
    @CountryOutdoorsYoutube 2 дні тому

    Gotta have it

  • @noeramirez4975
    @noeramirez4975 2 дні тому

    True tips, thanks

  • @deanmoloney5059
    @deanmoloney5059 3 дні тому

    Thanks bud , Alaska says hi

  • @PennNative
    @PennNative 3 дні тому

    Thank you sir!

  • @steelarchery9224
    @steelarchery9224 4 дні тому

    Thanks, George these videos have been really helping me out. I'll try this out next time I shoot.

  • @donnieball7994
    @donnieball7994 5 днів тому

    ❤ DONE & Nice 🤞🏼🙏🏼

  • @MikeLantzy1goodArrow
    @MikeLantzy1goodArrow 5 днів тому

    George, thank you for making this video . I’ve been struggling with this, this will be very helpful.

  • @anilfaujdar2001
    @anilfaujdar2001 7 днів тому

    Can this video be available in Hindi also?

  • @matthewnorris203
    @matthewnorris203 7 днів тому

    I need this lesson!

  • @davepoolman3725
    @davepoolman3725 9 днів тому

    Excellent teaching right there. I will watch these again before i shoot to try and mimic what your saying. Thank You

  • @ujjawal..720
    @ujjawal..720 9 днів тому

    What is cost of you hoyt stator handle price

  • @tonysorcinelli
    @tonysorcinelli 10 днів тому

    I have the Garmin zero sight and I don’t move the housing. My pin range is from 0 to 85 yards and I always center my peep on the housing. Do you think I need to switch to centering on each pin in my situation?

  • @Samblack...archery
    @Samblack...archery 10 днів тому

    New subscriber and New archer 👍🇬🇧

  •  11 днів тому

    Good information thank you 🤩

  • @aaronhall765
    @aaronhall765 11 днів тому

    Awesome thanks for sharing

  • @rdp9987
    @rdp9987 11 днів тому

    Really enjoy your videos. Thanks for all the great info.

  • @kellyskinner7282
    @kellyskinner7282 11 днів тому

    I was just working on that today. Great info 👍

  • @kennylainhart7148
    @kennylainhart7148 11 днів тому

    Great information 😁 thanks 👍

  • @BucksnBulls
    @BucksnBulls 11 днів тому

    Yer a legend.

  • @Jimbowiejr
    @Jimbowiejr 11 днів тому

    Thanks, great info.

  • @xforce708
    @xforce708 11 днів тому

    I’ve done similar for years. But for 3D and hunting with max yardages around 50 yards I’ve always set my peep for most comfort at 40 to 50 yards. Mainly because I feel I have more margin of error at closer yards and seems many hosts like to keep us in the 38 to 50 range. Good tip

  • @RyanMcMasters-iw7km
    @RyanMcMasters-iw7km 11 днів тому

    Thing a year. Lol

  • @matthewnorris203
    @matthewnorris203 12 днів тому

    In case anyone is wondering, when you take lessons from George, he has quite a bit of concepts and small tips that aren’t here. I’ve gone for 3 weekends with him and it changed my whole archery game. I actually enjoy it now

  • @matthewnorris203
    @matthewnorris203 12 днів тому

    It works

  • @chrisnoble662
    @chrisnoble662 16 днів тому

    You have made a blind man see - always struggled with the solid anchor and moving scope. Played with what you taught here today and - bham 🤯

  • @woodsdog7849
    @woodsdog7849 16 днів тому

    Great video, but I have a question on the initial timing. Although the bow was timed as you set it up, can you show how you would adjust it if it were not? Also, how many twists do you put into the string and cables when first setting up and is there a minimum or maximum number of twists you should be mindful of not exceeding? In other words, GRIV, what is your typical "baseline" number of twists in both the cables and the shooting string when setting up the bow initially? Does it even matter? How do you bring the bow "into spec." if it is not once you have installed the cables and string? Thanks and keep up the very informative videos.

  • @ToddRasmussen-q1z
    @ToddRasmussen-q1z 17 днів тому

    What about the people like me, that use an index release?

  • @rafaelcosta5107
    @rafaelcosta5107 17 днів тому

    When you explained why you align the peep to the target instead of the housing, you mentioned a multiple pin sight. Does this mean it makes no difference for a target bow with a single pin scope? Should I have a peep that is large enough for my 31mm scope, or should I have the smallest possible one so I can only see the dot and the target and align these three? And just one more thing about the peep height. Let's say I'm setting my bow for indoors (20 yards) and nothing else. If the peep is too high, my aim tends to be loose. If it is too low, my aim is hard. Why does this happen? In this scenario, how do I find the most stable peep position? Should I feel the anchor on my face and set it at the most comfortable position (would this naturally result in the most stable configuration?), or should I only worry about the visual stability of my aim regardless of where my hand touches my face? The "loose versus hard aim" issue also occurs with "long versus short draw lengths", right? Are these topics related somehow? Thank you very much

    • @donaldvonlintig8445
      @donaldvonlintig8445 10 днів тому

      From my 47 years of strictly Bowhunting experience, it makes no difference with a single pin scope. I replaced multiple pins, years ago with a single pin. Also I don't agree with the 1/8" diameter peep. Especially in a hunting situation, first take into consideration that the human eye pupil will dilate open to an average of 6mm in total darkness (depending on your age) so with that info. we come up with .040 x 6 = .240 diameter, just slightly less than a 1/4" size peep sight. So, in my opinion, putting anything less than a 1/4" peep right in front of your aiming eye, in a low light hunting situation is counter-productive. Blocking too much light with a small peep, might also cause your non-dominant eye to take over, in low light, if you shoot with both eyes open. and that will create bad misses left or right. With a 1/4" size peep, I would then try to match the scope housing, to fit just inside the peep, with minimal space around the edges, for the most accuracy. You can accomplish this by sliding your sight housing bar, in or out, until the scope matches the peep. If your just shooting targets then the "smallest peep theory" applies. Hope this helps.

  • @gaza9532
    @gaza9532 17 днів тому

    Always genius, Coach George:)

  • @waynestevenson9613
    @waynestevenson9613 17 днів тому

    TY GRIV! This is something I’ve been struggling with and the best way I’ve heard yet to confront this! Going to begin practicing this tomorrow!

  • @RobHenderson-h9i
    @RobHenderson-h9i 17 днів тому

    🤯

  • @Robert-yh6bb
    @Robert-yh6bb 17 днів тому

    Great knowledge, thank you sir 🎉

  • @hotbear9424
    @hotbear9424 17 днів тому

    Does it mean the 3 points (eye, peep and sights) are aligned, it doesn’t matter where the hand or head is?

  • @Matto_Harvo
    @Matto_Harvo 17 днів тому

    Thanks

  • @MISSION391
    @MISSION391 18 днів тому

    Dropping knowledge thanks Coach!!!

  • @Bryan-wc3et
    @Bryan-wc3et 18 днів тому

    Great video

  • @claytonchristensen4494
    @claytonchristensen4494 18 днів тому

    Gold! Thanks George!

  • @waynestevenson9613
    @waynestevenson9613 20 днів тому

    Niiiccce! Gotta have one!

  • @brianlew9559
    @brianlew9559 20 днів тому

    Not finding it.

    • @LCArchery
      @LCArchery 20 днів тому

      @@brianlew9559 it goes live Wednesday @ 4:00 pm.

  • @paulvega9893
    @paulvega9893 23 дні тому

    Thanks for the knowledge

  • @royhoglund1322
    @royhoglund1322 24 дні тому

    Great rebuild video, George! Love "Thing A Week"!

  • @Everythingoutdoors24
    @Everythingoutdoors24 24 дні тому

    I have used the e-clip tool to remove e-clips by flipping it over but honestly your flathead screwdriver method works much better. The soft nock knot you tied for your torque-less loop I usually refer to as a constrictor knot. I’m glad I’m also not the only one who drops spacers/clips and also hardly ever picks the right Allen when working on bows! Thanks for the great and informative video!

  • @ian993
    @ian993 24 дні тому

    How much poundage change going from one cam to another?

  • @jimhuttel2193
    @jimhuttel2193 24 дні тому

    I thought if you changed to a different cam you would have to change out your limbs? I maybe wrong, but great video nonetheless!!! Thanks GRIV!!!

  • @rogerhook8002
    @rogerhook8002 25 днів тому

    GRIV, I love your work. Center shot on the rest was eye opening. You make me think I can do this stuff. Got one suggestion. Add a sewing seam ripper to your tool chest. Will make removing small ties and peep tie ins, etc. sooooo much easier. My wife taught me the value of this small tool. It's in my archery tool box and will soon be in yours if you give it a try. Best wishes!

  • @floydallen9885
    @floydallen9885 25 днів тому

    Great video, George.

  • @alfredoromo6540
    @alfredoromo6540 25 днів тому

    First! Oh yeah! You are a professional! I think if I take my bow apart it takes me a week to put it back together. Well explained!

  • @elkchaser
    @elkchaser 28 днів тому

    Awesome! That’d be a great addition to my shop!!